Weert Groep specialises in powder coating on a variety of surfaces, such as galvanised steel, aluminium, stainless steel or even untreated (plain) steel. Before this the products always undergo a number of chemical cleaning stages. Passivating is then carried out by chromating with Chromium III in the case of galvanised steel, aluminium or stainless steel and by zinc phosphating in the case of plain steel. This results in an active corrosion-resistant intermediate layer, giving the whole system superior corrosion resistance.

We apply the powder coating itself as a 1 or 2-layer system. The base coat or primer always consists of an epoxy powder and the top layer of polyester or polyurethane. For extreme applications, for example off-shore, we even use a 3-layer system.

We also have sustainability in mind with these innovative coatings. The powder that does not adhere to the substrate is collected and reused. Moreover, powder paints or varnishes are solvent free and there is no danger warning for the raw materials used. In addition, powder paints and varnishes or powder coating (combined with a chemical pretreatment) give good adhesion and resistance to coating undermining. This results in a very sustainable protection against corrosion and excellent resistance against extreme weather conditions.

Where

THE NETHERLANDS

Verzinkerij Weert B.V. STRAMPROY
Industrieweg 35, Stramproy, P.O. Box 129, 6000 AC  Weert

 

BELGIUM

Electrocoat Genk N.V. GENK
Bosdel 61, 3600 Genk

 

what we offer

MAXIMUM PRODUCT DIMENSIONS

STRAMPROYGENK
LENGTH7,80 m13,00 m
HEIGHT2,45 m2,50 m
WIDTH0,90 m1,50 m
MAX. WEIGHT800 kg1.800 kg

POWDER COATING SCHEDULE


TIME / SERVICE

n general we work with a lead time of 5 working days for powder coating. After delivery we send an order confirmation with collection date and location.


what is the standard?

QUALITY ASSURANCE

Powder coating at Weert Groep is carried out in accordance with the strict requirements of GSB International.

On request we can provide a written guarantee declaration.

© Weert Groep | Ontwerp: Ontwerpburo de Keizerin | Tekst: Niqui zuivere taal

Weert Groep specialises in powder coating on a variety of surfaces, such as galvanised steel, aluminium, stainless steel or even untreated (plain) steel. Before this the products always undergo a number of chemical cleaning stages. Passivating is then carried out by chromating with Chromium III in the case of galvanised steel, aluminium or stainless steel and by zinc phosphating in the case of plain steel. This results in an active corrosion-resistant intermediate layer, giving the whole system superior corrosion resistance.

We apply the powder coating itself as a 1 or 2-layer system. The base coat or primer always consists of an epoxy powder and the top layer of polyester or polyurethane. For extreme applications, for example off-shore, we even use a 3-layer system.

We also have sustainability in mind with these innovative coatings. The powder that does not adhere to the substrate is collected and reused. Moreover, powder paints or varnishes are solvent free and there is no danger warning for the raw materials used. In addition, powder paints and varnishes or powder coating (combined with a chemical pretreatment) give good adhesion and resistance to coating undermining. This results in a very sustainable protection against corrosion and excellent resistance against extreme weather conditions.

MAXIMUM PRODUCT DIMENSIONS

STRAMPROYGENK
LENGTH7,80 m13,00 m
HEIGHT2,45 m2,50 m
WIDTH0,90 m1,50 m
MAX. WEIGHT800 kg1.800 kg

POWDER COATING SCHEDULE

TIME / SERVICE

n general we work with a lead time of 5 working days for powder coating. After delivery we send an order confirmation with collection date and location.

SUSTAINABLE

NON-TOXIC

GSB QUALITY

LOW MAINTENANCE

UNIVERSAL APPLICATION

© Weert Groep
      Ontwerp:
Ontwerpburo de Keizerin | Tekst: Niqui zuivere taal